Family-Run Specialists
Technical Buyer GuideUpdated for 2026 Market•6 min read

How Much Does a Media Wall Cost in the UK? (2026 Complete Installation & Stud Depth Guide)

Planning a modern media wall fireplace for your living room? Here is an unvarnished breakdown of realistic UK materials, joinery, electrical, and appliance costs—along with essential timber stud depth requirements.

Quick Cost Summary (2026 Averages)

In the UK, building a media wall typically costs between £1,800 and £4,500 for a professionally completed installation with a premium panoramic electric fire (such as British Fires). Self-builders tackling the timber framing DIY can complete a project for £900 to £1,600.

1. 2026 UK Media Wall Cost Comparison

Project TierWhat's IncludedEstimated Total
DIY Self-BuildTimber, plasterboard, standard inset electric fire, paint finish (your own labour)£900 – £1,600
Mid-Range ProfessionalJoiner/carpenter framing, plastering, certified electrical spurs, 1200mm panoramic fire£2,200 – £3,400
Luxury Bespoke Package1600mm 3-sided British Fires suite, custom acoustic panelling, LED mood alcoves, soundbar recess£3,500 – £6,000+

2. Stud Depth & Timber Specifications

One of the most critical steps in media wall design is calculating your stud depth before buying timber. Building too shallow will prevent the fire engine from sitting flush, while building unnecessarily deep robs valuable floor area from your lounge.

Standard Stud Depth: 200mm – 320mm

Most panoramic fires (such as British Fires New Forest 1200 / 1600) have an engine depth of approximately 180mm to 300mm. An overall structure depth of 250mm to 320mm accommodates the fire engine, plasterboard skin, and concealed power cables.

Timber Sizing: 75mm x 50mm (3x2)

We recommend CLS or kiln-dried C16 timber studs sized at 75mm x 50mm or 100mm x 50mm. This provides the structural rigidity necessary to safely support heavy large-format OLED televisions without warping.

3. Electrical Wiring & Socket Placement

All modern media wall electric fires operate from a standard 13-amp UK plug socket. However, plan your cable routing carefully before plasterboarding:

  • Dedicated Double Socket for TV & Fire: Position behind the TV mounting bracket and inside the lower fire cavity.
  • Concealed Cable Conduit: Install a wide brush plate or 50mm conduit pipe connecting the TV alcove to the media console so HDMI and Ethernet cables can be swapped easily in future.
  • Fused Spur Switch: A hidden isolation switch nearby allows you to isolate power to the fire without taking it out of the wall.

Media Wall Cost FAQs

How much does a complete media wall cost in the UK in 2026?

On average, a professionally built media wall in the UK costs between £2,200 and £4,500 including timber stud framing, plastering, electrical wiring, paint finishing, and a premium panoramic electric fire (such as the British Fires New Forest 1200 or 1600). A DIY build with an entry-level fire can be completed for £900 to £1,600.

What stud depth do I need to frame for a media wall electric fire?

Most modern panoramic electric fires require a minimum cavity depth of 200mm to 320mm. Using standard 75mm x 50mm (3x2 inch) or 100mm x 50mm (4x2 inch) timber studs with 12.5mm plasterboard provides structural rigidity and adequate cable space.

Do I need an electrician for a media wall?

Yes, it is strongly recommended. You will need double 13A sockets behind the TV recess and inside the electric fire cavity to eliminate dangling cables. A certified electrician will also ensure the circuits are properly fused and compliant with Part P building regulations.

Should the TV be wider or narrower than the electric fire?

For visual balance, your electric fire should ideally be the same width or slightly wider than your television. If your TV is wider than the fire beneath it, the installation can look top-heavy.

Inspect Live British Fires Suites in Our Showroom

Before you commit to framing measurements, visit our Bristol or Coventry showroom to inspect flame heights, examine log realism, and grab exact technical drawings from our team.

Get In Touch

Planning a Fireplace or Media Wall? Speak with the Bains Team

Whether you need to verify chimney flue compatibility, discuss made-to-measure stone mantels, or check stock before visiting, John, Mark and our showroom team are here to help.

Bristol Flagship Showroom

Factory Workshop

801 Bath Road, Brislington, Bristol BS4 5NL

Coventry Studio Showroom

Midlands Studio

Unit 7B Kingswood Close, Holbrooks, Coventry CV6 4AZ

Send Us a Photo via WhatsApp

Snap your chimney breast or room for quick flue advice.

Chat Now

Request Advice or a Free Quotation

Tell us what you have in mind. No pushy sales calls — just honest fireplace advice.

We respect your privacy. Your contact details will only be used to respond to your fireplace enquiry.